Boston ADVANCE conditioning solution combines dual disinfection with a cushioning system to soothe your eyes and provide lens wearing comfort.
Boston ADVANCE conditioning solution disinfects and cushions your lenses to help reduce friction between your lens and eye.
Disinfection System
Our ingredients: Chlorhexidine Gluconate (0.003%), Polyaminopropyl Biguanide (0.0005%), Edetate Disodium (0.05%)
What they do:Disinfecting system kills micro-organisms (germs) on your lens.
Wetting and Cushioning System
Our ingredients: Derivatized Polyethylene Glycol, Cellulosic Viscosifier, Cationic Cellulose Derivative Polymer, Polyvinyl Alcohol
What they do: Enhances comfortable wear by surrounding lenses with moisture for complete wetting. Cushions lenses with a comfort system for more comfortable insertion and wear.
Boston ADVANCE cleaner
For Fluoro Silicone Acrylate and Silicone Acrylate Rigid Gas Permeable Contact Lenses
1. Wash your hands with mild soap.
2. Rub both sides of the lenses carefully with two (2) to four (4) drops of Boston ADVANCE cleaner for twenty (20) seconds.
3. Remove all traces of the cleaner by thoroughly rinsing with fresh tap water.
4. Place lenses in empty lens case and fill with fresh Boston ADVANCE conditioning solution. Soak lenses for at least four (4) hours (or overnight) before wearing.
5. Discard solution ninety (90) days after opening. Record date opened in space provided on the bottle label. Note: When used daily, this solution will be depleted before ninety (90) days.
- Lens case should be replaced frequently to avoid potential microbial contamination and ocular irritation.
Boston ADVANCE conditioning solutionTo ensure proper disinfecting, all steps listed below must be followed:
1. Wash your hands with mild soap. (Caution - pump soaps may contain oil-based suspension agents.)
2. After cleaning with Boston ADVANCE cleaner and rinsing, place lenses in empty lens case and fill to top of ridges with fresh Boston ADVANCE conditioning solution. Soak lenses for at least four (4) hours (or overnight) before wearing. Always use fresh solution for soaking and storing lenses.
3. After removing lenses from the lens case, apply a fresh Boston ADVANCE conditioning solution to wet the lenses for additional cushioning and insert.
4. The thoroughly clean interior of the lens case with hot water and air dry after each use.
5. Discard solution ninety (90) days after opening. Record date opened in space provided on the bottle label. Note: When used daily, this solution will be depleted before ninety (90) days.
- The lens case should be replaced frequently to avoid potential microbial contamination and ocular irritation.